RHEINGOLD

(ISTA/D & ISTA/P )

Is the best industry standard BMW diagnostics, coding and programming software

The Ultimate Rheingold Tablet System

Available in Two editions:


Dealership / Workshop edition comes loaded with Rheingold ISTA/D + ISTA/P and the certified ICOM A, also available in G4 SSD Powered, 20X faster than regular HDD.




Software

Rheingold ISTA/D 4.10 software + iSetup + Install instructions(Download version from a US servers).



Tested on BMW F10 & E90 Models from 1983 till 2017.
Works on E & F series.

Developed, tested and works on Windows 7 and 10 64 bits only.

Supported languages:


Version 4.7:(Hardware version)
  • English
  • Dutch ( Netherlands)
  • Russian
Deutsch (German)


Version 4.10:



  • English
  • Deutsch (German)


Supported interface types: Ediabas standard settings, OMITEC interface(USB/serial), HO-ICOM/ENET local network, HO-ICOM/ENET local and ISIS network, HO-ICOM/ENET direct connection and Simulation mode.
Fast shipping (ships from the USA).

Rheingold ISTA-P 3.64 + Expert mode+ KDCAN ICOM Emulator + ENET ICOM Emulator + iSetup+ Install instructions (Download Version).


The ISTA/P programming system is an ISPI application and stands for Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules in BMW Group vehicles.

Important note: Vehicle programming/coding is permitted only when:

Developed, tested and works on Windows 7 and 10 64 bits only.

A test module in the ISTA workshop system requests programming

  • A BMW-approved fault elimination measure requests vehicle programming
  • Retrofitting or conversion are required
  • Required as part of a technical campaign
  • Control modules need to be replaced.
  • Custom coding is not supported , we still offer free tools for custom coding like ESYS and NCSEXPERT, but we don't support them.

Tested on BMW F10 & E90 Models.

Works on E & F series.

Developed, tested and works on Windows 7 and 10 64 bits only.

Supported languages:

  • American English
  • French
  • Japanese
  • Spanish
  • British English
  • German
  • Korean
  • Swedish
  • Chinese
  • Greek
  • Polish
  • Thai
  • Czech
  • Indonesian
  • Portuguese
  • Turkish
  • Dutch
  • Italian
  • Russian





Rheingold ISTA/D 4.10 software + iSetup + Install instructions on USB 3.0 flash drive for BMW.


Tested on BMW F10 & E90 Models.
Works on E & F series.
Developed, tested and works on Windows 7 & 10 64 only.
Supported languages:

  • English
  • Deutsch (German)


Supported interface types: Ediabas standard settings, OMITEC interface(USB/serial), HO-ICOM/ENET local network, HO-ICOM/ENET local and ISIS network, HO-ICOM/ENET direct connection and Simulation mode.
Fast shipping (ships from the USA).

Cables

Certified BMW ENET Interface Cable (OBD2 to Ethernet) for coding, programming & diagnostics.


Can be used with Rheingold ISTA/D, E-SYS, INPA, and ISIS.

Specifications:
RJ-45 connector
CAT6 Cable
Black OBD Interface connector
7ft length.
Made in the USA.
Compatible BMW Models:
BMW 1-series: F20, F21, F44, F45, F46
BMW 2-series: F22, F23
BMW 3-series: F30, F31, F34, F80
BMW 4-series: F32, F33, F35, F36, F82, F83
BMW 5-series: F07, F10, F11, F18
BMW 6-series: F06, F12, F13
BMW 7-series: F01, F02, F03, F04
BMW i-series: i3 (I1), i8 (I12)
BMW X-series: F15, F16, F25, F26, F48
BMW ///M-series: F80, F82, F83, F10, F06, F12, F13
ALPINA Models: D3, B3, B4, XD3, D5, B5, B6, B7.

Certified BMW K+DCAN Interface Cable (OBD2 to USB) for coding, programming & diagnostics.


Features:
Condition: 100% brand new
This Interface allows full diagnostic of BMW`s build from 1998 - 2008
Works with INPA, SSS, Progman and others.
The smallest, best looking & highest quality of it`s kind.
Connects to USB (built in 1,5m long USB Cable, creates virtual comport)
Double K-Line support
High Speed D
CAN and PT-CAN support(500 kbit/s)
Low Speed PT-CAN support(100 kbit/s)
Battery voltage detection by control line
Ignition voltage detection by control line
Functions:
- Read & erase errors.
- Adaptations.
- Coding.

Supports protocols:
Fast magistral D-CAN and PT-CAN (500 kbit/s)
Slow magistral K-CAN (100 kbit/s)
Standard BMW protocol (BMW OBD interface)


Compatible BMW Models:
BMW E60, E61 od 03/2007
E83 od 09/2006
E81, E87 od 03/2007
E90, E91, E92, E93 od 03/2007
E70 (new model X5)

Protocol "BMW OBD interface" for older cars:
from 1995 to 1998 (don`t need K-line).
from 1998 to 03/2008 (all models).


The 20 PIN Round Connector for older BMW's is not included in this kit, check your BMW requirement from the chart below:


ModelChassisConnector Type
3-Series 1988-1992E30Round Connector
3-Series 1992-1999E36Round Connector
3-Series 1998-2000E46Round Connector
3-Series 2001-2006E46OBD2 Connector under dash left side
3-Series 2005-2009E90OBD2 Connector behind cover on kick panel
5-Series 1989-1995E34Round Connector
5-Series 1996-2000E39Round Connector
5-Series 2001-2003E39OBD2 Connector
5-Series 2004-2009E60OBD2 Connector behind cover on kick panel
7-Series 1988-1994E32Round connector
7-Series 1995-2001E38Round connector
7-Series 2001-2008E60OBD2 Connector behind cover on left kick panel
Z3 AllE36Round connector
Z4 AllE85-E89OBD2
Z8 2000-2001E52Round Connector
Z8 2002-2003E52OBD2
X3 AllE83OBD2
X5 1999-2001E53Round connector
X5 2002-2009E53OBD2
MINI Cooper AllR50-R56OBD2


BMW Rheingold ISTA/D software +Certified ENET Cable & Certified K+DCAN cable (Kit)

For BMW F&E Series

This kit includes:

-Rheingold ISTA/D 4.8 software + Install instructions on USB 3.0 flash drive for BMW.

-Certified BMW ENET Interface Cable (OBD2 to Ethernet) for coding, programming & diagnostics.

-Certified BMW K+DCAN Interface Cable (OBD2 to USB) for coding, programming & diagnostics.



The 20 PIN Round Connector for older BMW's is not included in this kit, check your BMW requirement from the chart below:


ModelChassisConnector Type
3-Series 1988-1992E30Round Connector
3-Series 1992-1999E36Round Connector
3-Series 1998-2000E46Round Connector
3-Series 2001-2006E46OBD2 Connector under dash left side
3-Series 2005-2009E90OBD2 Connector behind cover on kick panel
5-Series 1989-1995E34Round Connector
5-Series 1996-2000E39Round Connector
5-Series 2001-2003E39OBD2 Connector
5-Series 2004-2009E60OBD2 Connector behind cover on kick panel
7-Series 1988-1994E32Round connector
7-Series 1995-2001E38Round connector
7-Series 2001-2008E60OBD2 Connector behind cover on left kick panel
Z3 AllE36Round connector
Z4 AllE85-E89OBD2
Z8 2000-2001E52Round Connector
Z8 2002-2003E52OBD2
X3 AllE83OBD2
X5 1999-2001E53Round connector
X5 2002-2009E53OBD2
MINI Cooper AllR50-R56OBD2

BMW Rheingold ISTA/D software + Certified ENET Cable (Kit)

For BMW F Series

This kit includes:

-Rheingold ISTA/D 4.8 software + Install instructions on USB 3.0 flash drive for BMW.

-Certified BMW ENET Interface Cable (OBD2 to Ethernet) for coding, programming & diagnostics.






BMW Rheingold ISTA/D software + Certified K+DCAN Cable (Kit)

For BMW E Series

This kit includes:

-Rheingold ISTA/D 4.8 software + Install instructions on USB 3.0 flash drive for BMW.

-Certified BMW K+DCAN USB Interface Cable (OBD2 to USB) for coding, programming & diagnostics.

The 20 PIN Round Connector for older BMW's is not included in this kit, check your BMW requirement from the chart below:


ModelChassisConnector Type
3-Series 1988-1992E30Round Connector
3-Series 1992-1999E36Round Connector
3-Series 1998-2000E46Round Connector
3-Series 2001-2006E46OBD2 Connector under dash left side
3-Series 2005-2009E90OBD2 Connector behind cover on kick panel
5-Series 1989-1995E34Round Connector
5-Series 1996-2000E39Round Connector
5-Series 2001-2003E39OBD2 Connector
5-Series 2004-2009E60OBD2 Connector behind cover on kick panel
7-Series 1988-1994E32Round connector
7-Series 1995-2001E38Round connector
7-Series 2001-2008E60OBD2 Connector behind cover on left kick panel
Z3 AllE36Round connector
Z4 AllE85-E89OBD2
Z8 2000-2001E52Round Connector
Z8 2002-2003E52OBD2
X3 AllE83OBD2
X5 1999-2001E53Round connector
X5 2002-2009E53OBD2
MINI Cooper AllR50-R56OBD2